WALAILAK JOURNAL OF SCIENCE AND TECHNOLOGY

Volume 18, No. 13, Month JULY, Year 2021, Pages -

An efficient numerical simulation of 2d natural convection in an inclined cavity with internal heat generation using differential quadrature me

Israa ALESBE, Sattar ALJABAIR, Jalal M. JALIL

Abstract Download PDF

Natural laminar convective fluid flow has been simulated inside inclined rectangular cavities with and without internal heat generation for different aspect ratios and inclination angles. The most important basic dimensionless parameters for this problem are the external Rayleigh number (RaE) and the internal Rayleigh number (RaI), where RaE refers to the effects of the differential heating of the side walls and RaI refers to the amount of heat produced internally. Results were obtained for 4 cases with 192 tests: case (1), RaI = 0 without internal source generation, and cases (2, 3, and 4) with internal source generation for RaI = RaE, 10 RaE, and 100 RaE, respectively. In all cases, the parameters of study changed as 103 ≤ RaE ≤106, 0 ≤ RaI ≤ 107, inclination angle from 0 to 60 deg., and aspect ratios of the enclosure from 0.5 to 2. Results were represented graphically for flow and thermal fields as a streamline, isothermal contours, and Nusselt number. The computed results show that the strength of convection currents is measured by the internal energy. Finally, it is illustrated that by using a few grid points and a shorter CPU time for calculation, the present method can produce accurate numerical results. Also, increase in RaI leads to increasing heat transfer rate and its direction out from the cavity at both hot and cold walls. For lower values of RaI, heat transfer diffusion is more prominent, while for higher values of RaI, convection outweighs diffusion.

Keywords

DQ method, Natural convection, Numerical method, Internal heat generation

---